22XX Series:  Designed as the result of input received from several managers of national retail outlets to make use high space in container and leave room on the floor for palletized material. This line will allow pallets as tall as 48” to be stored under the shelves.

2208 Shelf Bracket:  A two-shelf unit that uses 2 - 2 x 8 pieces of construction grade material per shelf. This results in a shelf that is 14 ½” deep. The load rating is 600 lbs. per bracket arm and 1200 lbs. per bracket. Two brackets means you have 2400 lbs. shelves.

2210 Shelf Bracket:  A two-shelf unit that uses 2 - 2 x 10 pieces of construction grade material per shelf. This results in a shelf that is 18 ½” deep. The load rating is 550 lbs. per bracket arm and 1100 lbs. per bracket. Two brackets means you have 2200 lbs. shelves.

2212 Shelf Bracket: A two-shelf unit that uses 2 - 2 x 12 pieces of construction grade material per shelf. This results in a shelf that is 22 ½” deep. The load rating is 500 lbs. per bracket arm and 1000 lbs. per bracket. Two brackets means you have 2000 lbs. shelves.

32XX Series: Our original product design that provides varied shelf heights to accommodate a wide variety of items. This line will allow items as large as 30” tall to be stored on the floor under the shelves. (Height varies depending on D-ring configuration)

3208 Shelf Bracket: A three-shelf unit that uses 2- 2 x 8 pieces of construction grade material per shelf. This results in a shelf that is 14 ½” deep. The load rating is 600 lbs. per bracket arm and 1200 lbs. per bracket. Two brackets means you have 2400 lbs. shelves.

3210 Shelf Bracket: A three-shelf unit that uses 2 - 2 x 10 pieces of construction grade material per shelf. This results in a shelf that is 18 ½” deep. The load rating is 550 lbs. per bracket arm and 1100 lbs. per bracket. Two brackets means you have 2200 lbs. shelves.

3212 Shelf Bracket: A three-shelf unit that uses 2 - 2 x 12 pieces of construction grade material per shelf. This results in a shelf that is 22 ½” deep. The load rating is 500 lbs. per bracket arm and 1000 lbs. per bracket. Two brackets means you have 2000 lbs. shelves.

4210 Shelf Bracket: A four-shelf unit that uses 2 - 2 x 10 pieces of construction grade material per shelf. This results in a shelf that is 18 ½” deep. The load rating is 550 lbs. per bracket arm and 1100 lbs. per bracket. Two brackets means you have 2200 lbs. shelves.

C Series: Originally conceived to allow in the organization of electrical conduit, these units are being used by Electrical, Mechanical, Fire Suppression, General Contractors, and more.

4000C Pipe Rack Bracket: Four support arms, configured the same as the 5000C. This unit increases the useable floor space below to approximately 24”.

C Series: Originally conceived to allow in the organization of electrical conduit, these units are being used by Electrical, Mechanical, Fire Suppression, General Contractors, and more.

5000C Pipe Rack Bracket: Five support arms, mounted at 30degrees to the upright for high volume storage capability, includes bracing on each arm to increase load capability and a roll stop for enhanced safety. This unit maximizes the use of wall space and provides approximately 8” of clear space on the floor below.

SB3210FSS: File Storage System designed specifically to organize archived file boxes efficiently within containers. Load rated at 600 lbs. per bracket arm and 1800 lbs per bracket. This will accommodate full sized bankers boxes. This unit is designed to accept 2 – 2 x 10 pieces of construction grade material per shelf.

SB4210FSS: File Storage System designed specifically to organize archived file boxes efficiently within High Cube containers. Load rated at 600 lbs. per bracket arm and 1800 lbs per bracket. This will accommodate full sized bankers boxes. This unit is designed to accept 2 – 2 x 10 pieces of construction grade material per shelf.

2000AB Apparel/Bike Bracket: Designed to add further organization options for the retail market, this is a two-arm bracket that accepts standard 1” GRC (galvanized rigid conduit) as support rod from which apparel may be suspended two layers high. With the use of our accessory BSH (Bicycle Storage Hook) this bracket will accept the storage of bikes as well. Different configurations can be set up to accept apparel and bikes easily within the same container, along the same wall.